Version 1.0 ist vom 21. Juni. Ich fliege die Gazellen seit dem 1 Juli.
Wer fliegt sie auch und hat Tipps, wie man die RPMs auch bei längeren Flügen konstant hoch halten kann.
Beiträge von Hans Rudolf
-
-
die beste Lösung: deinstall Bitdefender!
-
soeben erhalte ich die mail:
"Microsoft Flight Simulator launches on August 18th"nicht neugierig auf MS Flight Simulator 2020?
-
kann dem nur beistimmen, super.
-
vielen Dank Marco für deinen hilfreichen Hinweis!
Das plugin SASL3_Tbient wird tatsächlich zur Kontrolle verwendet, wie der folgende log-Eintrag beweist:
"SASL initialization not confirmed from thranda/misc/has_G1000 - we will stop trying to load liverypaint"Inzwischen läuft die Kodiak und macht viel Freude.
Ich wünsche dir einen schönen Sonntag
mit liebem Gruss
HansRuedi -
interessant ist zum Beispiel, dass man das Panel individuell konfigurieren kann!
-
Heute gekauft und bereits bei activation gecrashed!
versucht mit x-plane 11.41 und x-plane 11.50b10
Hier das Ende des Logfiles:
[SASL3_TBIENT INFO]: Initializing...
[SASL3_TBIENT INFO]: Path to module: F:\X-Plane 11.41/Aircraft/myPayware/Thranda_Quest_Kodiak_v2/plugins/SASL3_Tbient/data/modules/main.key
[SASL3_TBIENT INFO]: Loading module...
[SASL3_TBIENT INFO]: [LUA]: loading module
--=={This application has crashed because of the plugin: SASL3_Tbient (SASL)}==-- -
Danke für den Tip!
Im File GizmoLog.txt fand ich die Lösung ("X-Aviation Licensing: Empty license file")
Hans Rudolf(alles fluggeret wieder!)
-
Wer schon bei X-Aviation eingekauft hat weiss. dass sie eine sehr strenge Kontrolle haben: alle par Wochen müssen die Registrierungsdaten bestätigt werden.
Nun wird mir seit einigen Wochen der Zugang gesperrt.
Ich habe deswegen X-Aviation angeschrieben, inzwischen schon 3 Mal, aber ohne die geringste Reaktion ihrerseits.
Hat jemand schon ähnliche negative Erfahrungen mit X-Aviation gemacht?
Und was kann man dagegen tun?
-
Wer diese Payware AN-2 besitzt und im VR-Modus fliegen möchte, kann dieses Configurationsfile einsetzen:
Name der Datei: AN-2-REyes-v110_vrconfig.txt
Inhalt der Datei:A
1100
VRCONFIG################################
#TELEPORT HOTSPOTS
###############################################
#
# AABB +X nach rechts +Y nach oben +Z nach hinten
# minX minY minZ maxX maxY maxZ - relativ zum Schwerpunkz (CG) des Flugzeugs
# PRESET_XYZ pilot_head_x pilot_head_y pilot_head_z = seitliche, vertikale, horizontale Position
# - relativ zum Schwerpunkz (CG) des Flugzeugs
# PRESET_PSI head turn right deg
# PRESET_THE head pitch up
# PRESET_PHI heat tilt right
#
#
###############BEGIN_TELEPORT_HOTSPOT SITTING Pilot's Seat
AABB -0.9 -0.6 -0.85 0.1 0.4 -1.35
PRESET_XYZ -0.40 -0.05 -0.95
PRESET_PSI 0.0
PRESET_THE 0.0
PRESET_PHI 0.0
END_TELEPORT_HOTSPOTBEGIN_TELEPORT_HOTSPOT SITTING CoPilot's Seat
AABB -0.1 -0.60 -0.85 0.9 0.4 -1.35
PRESET_XYZ 0.40 -0.05 -0.95
PRESET_PSI 0.0
PRESET_THE 0.0
PRESET_PHI 0.0
END_TELEPORT_HOTSPOTBEGIN_TELEPORT_HOTSPOT SITTING Left Seat
AABB -0.8 -1.20 0.25 -0.2 1.70 1.25
PRESET_XYZ -0.55 -0.60 1.15
PRESET_PSI 0.0
PRESET_THE 0.0
PRESET_PHI 0.0
END_TELEPORT_HOTSPOTBEGIN_TELEPORT_HOTSPOT SITTING Right Seat
AABB 0.2 -1.20 0.25 0.8 1.7 1.25
PRESET_XYZ 0.40 -0.60 1.15
PRESET_PSI 0.0
PRESET_THE 0.0
PRESET_PHI 0.0
END_TELEPORT_HOTSPOT -
Unsere ungarischen Kollegen (x-plane.hu) haben seit Jahren am Modell eines Flugzeugs gearbeitet, das in Ungarn sehr verbreitet ist und sogar einen Ableger in der Schweiz hat. Ich meine die Antonov An-2, die wir in Grenchen bestaunen können.
Als Payware gibt es die An-2 lediglich für x-plane 10, ein gewisser «TeeJayOne» hat dagegen im vergangenen Jahr eine Freeware Version für x-plane 11 veröffentlicht.
https://forums.x-plane.org/ind…/44529-antonov-an-2-ksgy/
Ich steure hier ein kleines VR Configurationsfile bei. Damit kann – wer Lust hat – als Passagier mitfliegen…Name der Datei: AN-2_vrconfig.txt
Inhalt der Datei:A
1100
VRCONFIG################################
#TELEPORT HOTSPOTS
###############################################
#
# AABB +X nach rechts +Y nach oben +Z nach hinten
# minX minY minZ maxX maxY maxZ - relativ zum Schwerpunkt (CG) des Flugzeugs
# PRESET_XYZ pilot_head_x pilot_head_y pilot_head_z = seitliche, vertikale, horizontale Position
# - relativ zum Schwerpunkz (CG) des Flugzeugs
# PRESET_PSI head turn right deg
# PRESET_THE head pitch up
# PRESET_PHI heat tilt right
#
#
###############BEGIN_TELEPORT_HOTSPOT SITTING Pilot's Seat
AABB -1.5 -0.2 -0.45 -0.2 1.7 -1.15
PRESET_XYZ -0.45 1.45 -0.50
PRESET_PSI 0.0
PRESET_THE 0.0
PRESET_PHI 0.0
END_TELEPORT_HOTSPOTBEGIN_TELEPORT_HOTSPOT SITTING CoPilot's Seat
AABB 0.0 0.0 -0.45 1.0 1.0 -1.15
PRESET_XYZ 0.40 1.45 -0.50
PRESET_PSI 0.0
PRESET_THE 0.0
PRESET_PHI 0.0
END_TELEPORT_HOTSPOTBEGIN_TELEPORT_HOTSPOT SITTING Left Seat
AABB -0.8 0.0 0.25 -0.2 1.70 1.65
PRESET_XYZ -0.55 0.90 1.50
PRESET_PSI 0.0
PRESET_THE 0.0
PRESET_PHI 0.0
END_TELEPORT_HOTSPOTBEGIN_TELEPORT_HOTSPOT SITTING Right Seat
AABB 0.2 0.0 1.25 0.8 1.7 2.05
PRESET_XYZ 0.50 0.90 1.45
PRESET_PSI 0.0
PRESET_THE 0.0
PRESET_PHI 0.0
END_TELEPORT_HOTSPOT -
alles über die Aircraft VR Configuration findest du hier
https://developer.x-plane.com/…ile-format-specification/
mit freundlichem Gruss
Hans Rudolf -
[FONT=&]
Tu-134
https://forums.x-plane.org/ind…lyugin-update-x-plane-11/[/FONT]
[FONT=&]Nach einem längeren Flug möchtest du vielleicht auf dem Copilotensitz Platz nehmen.[/FONT]
[FONT=&] Zum Platzwechseln brauchst du einen VR Touch Controller und eine Erweiterung der VR Configurationsdatei.[/FONT]
[FONT=&]Name der Datei: Tu-134_vrconfig.txt
Inhalt der Datei:
A
1100
VRCONFIG################################
#TELEPORT HOTSPOTS
################################BEGIN_TELEPORT_HOTSPOT SITTING Pilot's Seat
AABB -4.00 -4.00 0.00 3.00 3.00 -15.70
PRESET_XYZ -0.55 2.12 -15.27
PRESET_PSI 0.0
PRESET_THE 0.0
PRESET_PHI 0.0
END_TELEPORT_HOTSPOTBEGIN_TELEPORT_HOTSPOT SITTING Copilot's Seat
AABB -4.00 -4.00 0.00 3.00 3.00 -15.70
PRESET_XYZ 0.55 2.12 -15.27
PRESET_PSI 0.0
PRESET_THE 0.0
PRESET_PHI 0.0
END_TELEPORT_HOTSPOT[/FONT]
-
Riviere hat eine Reihe ansprechender Freeware-Flugzeuge geschaffen. Ich möchte sie auch im VR-Modus fliegen. Dabei stelle ich fest, dass die Sitzposition des Piloten nicht stimmt. Er steht irgendwo hinter den Sitzen...
[FONT=&]
Abhilfe schafft eine VR Configurations-Textdatei, die im Ordner des Flugzeugs abgelegt wird.[/FONT][FONT=&][FONT=&]Vielleicht interessieren sich einige weitere Kollegen dafür, daher stelle ich die VR Configurations Dateien hier zur Verfügung:
[/FONT][/FONT] A320 neo
https://forums.x-plane.org/ind…41683-a320neo-x-plane-11/
Name der Datei: A320_vrconfig.txt
Inhalt der Datei
A
1100
VRCONFIG
################################
#TELEPORT HOTSPOTS
################################
BEGIN_TELEPORT_HOTSPOT SITTING Pilot's Seat
AABB -4.00 -4.00 0.00 3.00 3.00 -15.70
PRESET_XYZ -0.55 1.95 -13.90
PRESET_PSI 0.0
PRESET_THE 0.0
PRESET_PHI 0.0
END_TELEPORT_HOTSPOTA321 neo
https://forums.x-plane.org/ind…41682-a321neo-x-plane-11/
Name der Datei: A321_vrconfig.txt
Inhalt der Datei
A
1100
VRCONFIG################################
#TELEPORT HOTSPOTS
################################
BEGIN_TELEPORT_HOTSPOT SITTING Pilot's Seat
AABB -4.00 -4.00 0.00 3.00 3.00 -23.70
PRESET_XYZ -0.45 1.95 -18.20
PRESET_PSI 0.0
PRESET_THE 0.0
PRESET_PHI 0.0
END_TELEPORT_HOTSPOTA330 neo
https://forums.x-plane.org/ind…le/40465-airbus-a330-neo/
Name der Datei: A330_vrconfig.txt
Inhalt der DateiA
1100
VRCONFIG
################################
#TELEPORT HOTSPOTS
################################BEGIN_TELEPORT_HOTSPOT SITTING Pilot's Seat
AABB -4.00 -4.00 0.00 3.00 3.00 -25.00
PRESET_XYZ -0.55 3.65 -24.05
PRESET_PSI 0.0
PRESET_THE 0.0
PRESET_PHI 0.0
END_TELEPORT_HOTSPOTA380-plus
https://forums.x-plane.org/ind…les/file/38562-a380-plus/
Name der Datei: A380_vrconfig.txt
Inhalt der DateiA
1100
VRCONFIG################################
#TELEPORT HOTSPOTS
################################
BEGIN_TELEPORT_HOTSPOT SITTING Pilot's Seat
AABB -4.00 -4.00 0.00 3.00 3.00 -35.00
PRESET_XYZ -0.50 3.25 -27.50
PRESET_PSI 0.0
PRESET_THE 0.0
PRESET_PHI 0.0
END_TELEPORT_HOTSPOTATR72-500
https://forums.x-plane.org/ind…re-atr72-500-azul-pr-akd/
Name der Datei: ATR72_vrconfig.txt
Inhalt der DateiA
1100
VRCONFIG
################################
#TELEPORT HOTSPOTS
################################
BEGIN_TELEPORT_HOTSPOT SITTING Pilot's Seat
AABB -4.00 -4.00 0.00 3.00 3.00 -15.70
PRESET_XYZ -0.38 1.20 -10.40
PRESET_PSI 0.0
PRESET_THE 0.0
PRESET_PHI 0.0
END_TELEPORT_HOTSPOTFokker50
https://forums.x-plane.org/ind…les/file/44466-fokker-50/
Name der Datei: F50_vrconfig.txt
Inhalt der Datei
A
1100
VRCONFIG
################################
#TELEPORT HOTSPOTS
################################
BEGIN_TELEPORT_HOTSPOT SITTING Pilot's Seat
AABB -4.00 -4.00 0.00 3.00 3.00 -15.70
PRESET_XYZ -0.50 0.45 -6.50
PRESET_PSI 0.0
PRESET_THE 0.0
PRESET_PHI 0.0
END_TELEPORT_HOTSPOT
DHC8-100
https://forums.x-plane.org/ind…iles/file/43156-dhc8-100/
Name der Datei: DHC8-100_vrconfig.txt
Inhalt der Datei
A
1100
VRCONFIG################################
#TELEPORT HOTSPOTS
################################
BEGIN_TELEPORT_HOTSPOT SITTING Pilot's Seat
AABB -4.00 -4.00 0.00 3.00 3.00 -15.70
PRESET_XYZ -0.45 0.70 -6.60
PRESET_PSI 0.0
PRESET_THE 0.0
PRESET_PHI 0.0
END_TELEPORT_HOTSPOT[FONT=&]DHC8-300[/FONT]
https://forums.x-plane.org/ind…iles/file/43158-dhc8-300/
Name der Datei: DHC8-300_vrconfig.txt
Inhalt der Datei
A
1100
VRCONFIG
################################
#TELEPORT HOTSPOTS
################################
BEGIN_TELEPORT_HOTSPOT SITTING Pilot's Seat
AABB -4.00 -4.00 0.00 3.00 3.00 -15.70
PRESET_XYZ -0.45 0.70 -8.40
PRESET_PSI 0.0
PRESET_THE 0.0
PRESET_PHI 0.0
END_TELEPORT_HOTSPOTConcorde
https://forums.x-plane.org/ind…/41681-concorde-xplane11/
Name der Datei: concorde_vrconfig.txt
Inhalt der Datei
A
1100
VRCONFIG
################################
#TELEPORT HOTSPOTS
################################
BEGIN_TELEPORT_HOTSPOT SITTING Pilot's Seat
AABB -4.00 -4.00 0.00 3.00 3.00 -30.00
PRESET_XYZ -0.35 1.30 -26.75
PRESET_PSI 0.0
PRESET_THE 0.0
PRESET_PHI 0.0
END_TELEPORT_HOTSPOT[FONT=&]Aerion2[/FONT]
https://forums.x-plane.org/ind…files/file/41981-aerion2/
Name der Datei: As2_vrconfig.txt
Inhalt der Datei
A
1100
VRCONFIG
################################
#TELEPORT HOTSPOTS
################################
BEGIN_TELEPORT_HOTSPOT SITTING Pilot's Seat
AABB -4.00 -4.00 0.00 3.00 3.00 -25.00
PRESET_XYZ -0.38 0.48 -19.15
PRESET_PSI 0.0
PRESET_THE 0.0
PRESET_PHI 0.0
END_TELEPORT_HOTSPOTpetit_canard SUPAERO
https://forums.x-plane.org/ind…anard-supaero-x-plane-11/Name der Datei: pc_vrconfig.txt
Inhalt der DateiA
1100
VRCONFIG
################################
#TELEPORT HOTSPOTS
################################BEGIN_TELEPORT_HOTSPOT SITTING Pilot's Seat
AABB -4.00 -4.00 0.00 3.00 3.00 -4.20
PRESET_XYZ -0.00 0.65 -0.75
PRESET_PSI 0.0
PRESET_THE 0.0
PRESET_PHI 0.0
END_TELEPORT_HOTSPOT
Meine Testumgebung: X-Plane 11.30r3
mit den VR-Brillen Oculus Rift und Samsung Odyssey
Viel Vergnügen! -
Virtavia.com hat am 7. Januar 2019 die Version 1.0 ihres Stratosphären Jets B-47E für X-Plane 11 herausgebracht. In der Beschreibung steht auch "vrconfig.txt included for VR users".
https://store.x-plane.org/Virt…-47E-Stratojet_p_924.htmlNur, wenn man das Flugzeug im VR-Modus startet, befindet sich der Pilot ein paar Meter unterhalb des Flugzeuges...
Wie mir Virtavia mitteilt, konnten sie das Flugzeug selber im VR-Modus nicht testen. Wer es im VR-Modus fliegen möchte, muss daher selber folgende Aenderung im vrconfig.txt-file vornehmen:
A
1100
VRCONFIG################################
#TELEPORT HOTSPOTSnach Belieben
################################BEGIN_TELEPORT_HOTSPOT SITTING Pilot's Seat
AABB 0.00 -4.00 1.25 0.0 0.0 0.0
PRESET_XYZ 0.0 -4.0 1.55
PRESET_PSI 0.0
PRESET_THE 0.0
PRESET_PHI 0.0
END_TELEPORT_HOTSPOT
...Die Zeile
PRESET_XYZ 0.0 -4.0 1.55
ersetzen durch
PRESET_XYZ 0.0 1.25 -12.05
Ausgehend von diesen Standardwerten kann man die Position des Piloten dann nach eigenem Gutdünken verändern (höher/tiefer sitzen, Entfernung zu den Armaturen) ...(Wer es ganz einfach haben will, löscht aber einfach die vrconfig-Datei..)